This posting assumes you have a VBA auto macro and want to quit using the auto macro functionality and convert it to an add-in. See the previous posting VBA Document Projects as to why you might want to do this. Without a lot of explanation, here are the prerequisites and the steps required to create the add-in.
Here is an example of an automatic macro that exists within a drawing document. It automatically writes out dwf and pdf files of the drawing whenever the drawing is saved. The rest of this post looks at the process to create an add-in to replace this auto macro.
' Get the filename minus the extension.
Dim strFilename As String
strFilename = ThisDocument.FullFileName
strFilename = Left(strFilename, Len(strFilename) – 4)
' Save the current SilentOperation and then turn it on.
' This will suppress the dwf viewer from being displayed.
Dim currentSetting As Boolean
currentSetting = ThisApplication.SilentOperation
ThisApplication.SilentOperation = True
' Save the file as dwf.
Call ThisDocument.SaveAs(strFilename & ".dwf", True)
' Reset SilentOperation back to its previous value.
ThisApplication.SilentOperation = currentSetting
' Save the file as pdf.
Call ThisDocument.SaveAs(strFilename & ".pdf", True)
End Sub
What You'll Need
A Programming Language – To write an add-in you need to use a language that supports creating COM components. For this example I'll illustrate the process using both Visual Basic 2008 and C# 2008. Microsoft provides free Express versions of both of these languages. You can install them from the Microsoft web site. Microsoft also provides online training resources for learning these languages. If this is all new to you and you don't know which one to get I would recommend Visual Basic, but it really is a personal preference.
Inventor SDK Developer Tools – You'll also need some Inventor specific development tools. This is delivered when you install Inventor but you need to run its setup to install it. Assuming you're using Inventor 2009, locate the following file in Explorer and run it:
C:\Program Files\Autodesk\Inventor 2009\SDK\DeveloperTools.msi
Inventor 2009 was released when Visual Studio 2005 was the current development platform. Because of that the Add-In wizard provided with it does not get installed for use with Visual Studio 2008. To work around this you can copy the files below to the specified directories. Don't unzip the files but just copy the file as-is.
VB 2008
Copy VBInventorAddInTemplate.zip to
"My Documents\Visual Studio 2008\Templates\ProjectTemplates"C# 2008
Copy VCSInventorAddInTemplate.zip to
"My Documents\Visual Studio 2008\Templates\ProjectTemplates"
Creating the Add-In
The add-in is created using the add-in template. Start VB or C# and choose to create a new project. For the template choose "Autodesk Inventor AddIn", as shown below. You can also specify the name of the add-in at this point, ("AutoSaveAddIn" in the example below).
In the Visual Studio Solution Explorer you'll see the various files listed that were created for the project. For a Visual Basic add-in, most of the code is in the StandardAddInServer.vb file and for a C# add-in it is in the StandardAddInServer.cs file. Double-click on this file to open it in the code editor. You should see something very similar to one of the pictures below. Your GuidAttribute value will be different than those shown below since that is unique for every add-in.
Visual Basic Code Window
Visual C# Code Window
Editing the Name and Description of the Add-In
One common thing you'll want to do when creating an add-in is to define the name and description of the add-in as it will be seen in the Add-In Manager. You do this by editing the code in the "COM Registration" block of the code. Click on the "+" next to this region to expand it. The code in red is the portion I've changed to modify the name and the description. The code below is from the VB add-in but the C# code is almost identical and it will be obvious what to edit.
Dim clssRoot As RegistryKey = Registry.ClassesRoot
Dim clsid As RegistryKey = Nothing
Dim subKey As RegistryKey = Nothing
Try
clsid = clssRoot.CreateSubKey("CLSID\" + AddInGuid(t))
clsid.SetValue(Nothing, "Automated DWF and PDF Save")
subKey = clsid.CreateSubKey( _
"Implemented Categories\{39AD2B5C-7A29-11D6-8E0A-0010B541CAA8}")
subKey.Close() subKey = clsid.CreateSubKey("Settings")
subKey.SetValue("AddInType", "Standard")
subKey.SetValue("LoadOnStartUp", "1")
'subKey.SetValue("SupportedSoftwareVersionLessThan", "")
subKey.SetValue("SupportedSoftwareVersionGreaterThan", "12..")
'subKey.SetValue("SupportedSoftwareVersionEqualTo", "")
'subKey.SetValue("SupportedSoftwareVersionNotEqualTo", "")
'subKey.SetValue("Hidden", "0")
'subKey.SetValue("UserUnloadable", "1")
subKey.SetValue("Version", 0)
subKey.Close()
subKey = clsid.CreateSubKey("Description")
subKey.SetValue(Nothing, "Saves drawings as DWF and PDF.")
Catch ex As Exception
System.Diagnostics.Trace.Assert(False)
Finally
If Not subKey Is Nothing Then subKey.Close()
If Not clsid Is Nothing Then clsid.Close()
If Not clssRoot Is Nothing Then clssRoot.Close()
End Try
End Sub
Reacting to Events in Visual Basic
Now we can add the code that will react anytime a document is saved. For a VB add-in, add the code below that's shown in red. The second line is in the "ApplicationAddInServer Members" code region so you'll need to expand that region to see the code. The code consists of a declaration and an assignment.
Implements Inventor.ApplicationAddInServer
' Inventor application object.
Private m_inventorApplication As Inventor.Application
Private WithEvents m_appEvents As Inventor.ApplicationEvents
#Region "ApplicationAddInServer Members"
Public Sub Activate( _
ByVal firstTime As Boolean) _
' Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application
m_appEvents = m_inventorApplication.ApplicationEvents
End Sub
At the top of the code window are two combo boxes. The one on the left displays a list of classes and the one on the right displays a list of methods for the selected class. Choose "m_appEvents" on the left and "OnSaveDocument" on the right, as shown below. This will insert the sub m_appEvents_OnsaveDocument as shown below. This is the event handler for the OnSaveDocument event will be called whenever a document is saved in Inventor.
Here's code that's equivalent to the original AutoSave macro. This performs a couple of additional checks that the original automatic macro didn't need to do. First, the OnSaveDocument is fired before and after the document is actually saved. This listens for when the event is fired after the Inventor save. The event is also fired whenever any document is saved. This looks for and only handles drawing documents.
ByVal DocumentObject As Inventor._Document, _
ByVal BeforeOrAfter As Inventor.EventTimingEnum, _
ByVal Context As Inventor.NameValueMap, _
ByRef HandlingCode As Inventor.HandlingCodeEnum) _
Handles m_appEvents.OnSaveDocument
If BeforeOrAfter = EventTimingEnum.kAfter Then
If DocumentObject.DocumentType = DocumentTypeEnum.kDrawingDocumentObject Then
' Get the filename minus the extension.
Dim filename As String
filename = DocumentObject.FullFileName
filename = Left(filename, Len(filename) – 4)
' Save the current SilentOperation and then turn it on.
' This will suppress the dwf viewer from being displayed.
Dim currentSetting As Boolean
currentSetting = m_inventorApplication.SilentOperation
m_inventorApplication.SilentOperation = True
' Save the file as dwf.
DocumentObject.SaveAs(filename & ".dwf", True)
' Save the file as pdf.
DocumentObject.SaveAs(filename & ".pdf", True)
' Reset SilentOperation back to its previous value.
m_inventorApplication.SilentOperation = currentSetting
End If
End If
End Sub
Reacting to Events in C#
The code highlighted in red below was added to support handling the save event in C#. The last two lines are in the "ApplicationAddInServer Members" code region so you'll need to expand that region to see the code. The line where the delegate is created to handle the event is mostly created by using Intellisense. Go slowly as you type and you'll see options pop up that allow you to press the tab key to create much of the code.
private Inventor.ApplicationEvents m_appEvents = null;
public StandardAddInServer()
{
}
#region ApplicationAddInServer Members
public void Activate(
{
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
m_appEvents = m_inventorApplication.ApplicationEvents;
// Create the delegate object to handle the event.
m_appEvents.OnSaveDocument += new
ApplicationEventsSink_OnSaveDocumentEventHandler(
}
Intellisense can also create the event implementation code as you're typing the line above. Below is the code it created with the additional code in red that I added to save the dwf and pdf files.
{
// A value has to be returned for the handling code.
HandlingCode = HandlingCodeEnum.kEventNotHandled;
if (BeforeOrAfter == EventTimingEnum.kAfter)
{
if (DocumentObject.DocumentType == DocumentTypeEnum.kDrawingDocumentObject)
{
String filename = DocumentObject.FullFileName;
filename = filename.Substring(0, filename.Length – 4);
// Save the current SilentOperation and then turn it on.
// This will suppress the dwf viewer from being displayed.
Boolean currentSetting = m_inventorApplication.SilentOperation;
m_inventorApplication.SilentOperation = true;
// Save the file as dwf.
DocumentObject.SaveAs(filename + ".dwf", true);
// Save the file as pdf.
DocumentObject.SaveAs(filename + ".pdf", true);
// Reset SilentOperation back to its previous value.
m_inventorApplication.SilentOperation = currentSetting;
}
}
}
Cleaning Up
Finally, just a bit of code to clean up everything when the add-in is unloaded. This is in the Deactivate method of the add-in. The code I added is in red.
' Release objects.
Marshal.ReleaseComObject(m_appEvents)
m_appEvents = Nothing
Marshal.ReleaseComObject(m_inventorApplication)
m_inventorApplication = Nothing
System.GC.WaitForPendingFinalizers()
System.GC.Collect()
End Sub
Here's the equivalent code for C#.
{
// Disconnect the event delegate.
m_appEvents.OnSaveDocument -= new
ApplicationEventsSink_OnSaveDocumentEventHandler(
// Release objects.
Marshal.ReleaseComObject(m_appEvents);
m_appEvents = null;
Marshal.ReleaseComObject(m_inventorApplication);
m_inventorApplication = null;
GC.WaitForPendingFinalizers();
GC.Collect();
}
Using the Add-In
Now all you need to do is build the add-in. Building the add-in creates the dll and also registers it. When you run Inventor you should see the add-in in the Add-In Manager and when you save a drawing document the corresponding pdf and dwf files will also be created.
To use the add-in on another computer you need to copy the add-in dll to that computer and register it. Below are some commands you can use within .bat files to both register and unregister the add-in for 32 and 64-bit installations.
Register on 32-bit
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\RegAsm.exe /codebase AutoSaveAddIn.dll
PAUSE
Unregister on 32-bit
C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\RegAsm.exe /unregister AutoSaveAddIn.dll
PAUSE
Register on 64-bit
C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\RegAsm.exe /codebase AutoSaveAddIn.dll
PAUSE
Unregister on 64-bit
C:\WINDOWS\Microsoft.NET\Framework64\v2.0.50727\RegAsm.exe /unregister AutoSaveAddIn.dll
PAUSE
When you test the add-in you can't just open an existing drawing, immediately save it, and expect to see the dwf and pdf files. The reason is because the drawing hasn't changed so clicking the save button doesn't do anything. If you make any change to the drawing, i.e. edit an iProperty or move a view or dimension, the OnSaveDocument event is fired and the additional files will be created.
Leave a Reply to RandyCancel reply